Home · International Morse Code
International Morse Code is the version taught as “Morse” almost everywhere today. It is defined in Recommendation ITU-R M.1677-1, which fixes three things: the characters, the shapes of dots and dashes, and the ratios between the signals and the silences. Everything else — the note you hear, how fast you send, whether you use a key, a light or a buzzer — is left to the operator.
That division matters more than it looks. Two stations can work each other at 8 and 25 words per minute, one at 500 Hz and one at 700 Hz, and both are sending exactly the same code. Only the ratios have to match.
What the standard actually defines
Characters
Letters A–Z, digits 0–9, and a short list of punctuation. A handful of accented letters has its own codes as well — É is ..-.. — which is why a converter that folds accents has to say so.
Timing
A dot is one unit and a dash is three. The gap inside a letter is one unit, between letters three, between words seven. Speed is expressed as words per minute on the PARIS standard.
Procedural signals
Short patterns that mean something on their own rather than as letters: AR .-.-. for end of message, BT -...- for a break, SK ...-.- to close a contact.
What it does not define
No required tone, no required speed, no keyboard layout, no “correct” way to practise. Symbols like !, &, ;, _ and $ are hobby extensions, not part of the recommendation.
The 1:3:7 clock, in numbers
Every timing question in Morse reduces to one unit. At 20 words per minute the unit lasts 60 milliseconds: a dot 60 ms, a dash 180 ms, the space between letters 180 ms, between words 420 ms. At 12 words per minute those become 100, 300, 300 and 700 ms.
The bars below follow the speed you set, so you can see the ratio rather than count it:
This is also why “slow Morse” for a beginner is not the same as “long characters”. Farnsworth timing keeps each character fast and stretches only the gaps, so the letter keeps the shape your ear needs to learn. The learn Morse code page goes into that.
International Morse is not American Morse
American Morse grew up on wired telegraph lines, and it used internal spaces: C was .. . and O was . ., with a gap in the middle of the letter. On a landline that worked. On a noisy radio circuit the gap is the first thing to blur, and a letter that depends on it fails.
International Morse removed that dependency: every character is one clean run of dots and dashes, and the spaces carry only letter and word boundaries. If a chart online disagrees with this page on a basic letter, it is usually an American table mixed into an International one. For radio, puzzles, and the converter on this site, International is the one to use.
Where the boundary of “standard” sits
This is the part hobby charts tend to blur. The recommendation lists a specific punctuation set — period, comma, question mark, apostrophe, colon, slash, parentheses, equals, plus, hyphen, quotes, and @. It does not list the exclamation mark, ampersand, semicolon, underscore or dollar sign. Those are widely used on the air and they are fine to send, but they are extensions, and a chart that presents them as official is wrong about its own sources.
The same care applies to accented letters. É has a code in the recommendation, but “café” is not usually sent letter by letter with it; most traffic folds accents to the base letter so the message stays readable. This site folds rather than guesses, and marks anything it cannot encode with a question mark instead of silently dropping it.
How this site applies it
The converter on the Morse code translator uses one character map, built from the recommendation plus the labelled extensions, and the same map feeds the audio, the WAV files and the Morse code alphabet chart. Audio follows the 1:3:7 clock at whatever speed you set. Nothing you type leaves the browser, and there is no account to create.
Two behaviours are deliberate rather than accidental. Unknown characters come back as a question mark, because a missing letter in a callsign or a puzzle is worse than an obvious gap. And accented Latin letters are folded to A–Z, because an English sentence that suddenly grows one accented code is harder to decode, not more correct.
If a character here disagrees with the recommendation, that is a bug, not a dialect. The contact page explains what to include in a report so it can actually be checked.
International Morse Code FAQ
What is International Morse Code?
International Morse Code is the worldwide radio standard in ITU-R M.1677-1: letters A–Z, digits 0–9, a punctuation list, a few procedural signals, and the 1:3:7 timing ratios. It is not American Morse, which used different patterns and internal spaces on landline telegraph circuits.
Does it specify a tone or a speed?
No. The recommendation fixes the characters and the relative lengths — dot 1, dash 3, letter gap 3, word gap 7. Pitch and speed are operating choices, so 400 Hz and 800 Hz are both valid International Morse, and so are 5 and 30 words per minute.
Are accented letters and extra symbols included?
Only a short list. É is ..-.., and there are codes for a few other accented letters such as Ä, Ö and Ü. Symbols like !, &, ;, _ and $ are amateur-radio extensions, not part of the recommendation, so they are kept in a separate group here.
Is this site associated with the ITU?
No. It is an independent site with no affiliation, and it cites the recommendation as a public standard. Differences you see between charts online are usually American Morse mixed into an International table.