Home · Audio Morse code translator
This page is about the sound half of the translator: the tone, the speed, and what those controls actually change. If you only need the dots and dashes, the Morse code translator already shows them as you type — and it is also where the WAV file comes from, because that is the page with a message box.
Three settings, and what each one does
Speed (WPM)
Words per minute on the PARIS standard. One unit lasts 1.2 divided by the WPM number, so 20 WPM means a 60 ms dot and a 180 ms dash. This is the setting that decides whether a beginner can copy the result.
Pitch (Hz)
The note you hear, 400–1000 Hz. 600 Hz is the usual practice tone. Pitch does not affect readability of the pattern, only how well it cuts through whatever noise is around you.
Volume
Affects your speaker, and the WAV file if you make one on the translator page. Turn it down before you test a long message — a full paragraph of Morse is louder than it feels.
Gaps
Fixed by the standard, not by you: one unit inside a letter, three between letters, seven between words. Playback keeps that ratio, which is why the audio matches what a receiver expects.
Need the message as a file? Open the Morse code translator, type it in the box there, and use the WAV button next to Play. This page plays tones; the download sits with the message box.
Hear a few examples
These play at the speed and tone set above. The first is the standard distress call, the second is a general call used on the amateur bands, and the third is a word you can count the elements in as you listen.
CQ is -.-. --.- — two letters, sent as a general call to any station listening. It is a general call, not a distress signal: SOS is a completely different pattern, ... --- ..., and sending that one as a test is not a joke.
Why a file is worth having
A browser tab is a bad place to practise. The screen distracts you, the tab gets closed, and the phone locks. A file solves all three: it plays with the screen off, from the phone's music app, at whatever moment you actually have five minutes. It also lets a teacher put the same ten seconds of audio on a dozen devices without asking anyone to open a website.
That is why the download sits on the translator rather than on this page: a file has to be generated from a message, and the message box is there. Type or paste the phrase, set speed and pitch, then press WAV — the file is mono, 22 kHz, generated from the same character map and the same 1:3:7 clock the playback uses, so it sounds like what you just heard.
Audio for learning, not just for listening
The useful beginner setting is not “as slow as possible”. It is a character speed you eventually want — often 15–20 WPM — with longer gaps between characters. That is Farnsworth timing: the letter keeps its real shape, and only the silence stretches. Slow the characters themselves instead, and you learn a rhythm you will have to unlearn later.
Start with two or three characters in a session, play them, name them before the next one comes, and check yourself against the Morse code alphabet only afterwards. The learn Morse code page has a two-week schedule built on that loop, and an ear drill that plays one character at a time.
What this page does not do
It does not listen. Reading a recording, a microphone feed or the audio track of a video is a different job — that needs a CW decoder such as Fldigi or CW Skimmer, and it is a harder problem than generating a tone. This page produces audio from text; it does not turn audio back into text.
It also does not convert a message on its own. There is no text box here — the sliders and the three example buttons are all it plays. For anything longer than a phrase, use the translator.
Audio Morse code translator FAQ
What does an audio Morse code translator do?
It turns typed text into a timed CW tone in your browser: letters become dots and dashes played at a pitch and speed you choose. Saving the result as a WAV is done from the translator on the home page, where the message box is.
What pitch should I use?
600 Hz is the common practice pitch, and anything from 400 to 1000 Hz is valid International Morse — the standard fixes the rhythm, not the note. Pick what you can hear clearly over background noise and stay there while you practise.
Does it decode audio files or a microphone?
No. It generates audio from text. Reading a recording or a microphone feed is a different job and needs a CW decoder such as Fldigi or CW Skimmer. The audio here is produced, not analysed.
Can I keep the audio?
Yes, from the home page's translator rather than this page. Type the message there, set the speed and pitch, then press WAV. It writes a mono 22 kHz file of exactly the rhythm you heard. This page plays tones and explains the controls; it has no download button of its own.